didlogic vs didXL for international numbers and voice

Compare didXL and didlogic for international phone numbers and voice. Check how you buy, what you can see before you sign up, and how outbound calls are carried, then test one number or route on a free test DID.

Test didlogic for free View number pricing

NUMBERS, VOICE, AND WHOLESALE

Know which part of didXL you are comparing

didlogic operates its own network (12 physical PoPs, AS13006) and sells international phone numbers, SIP trunks and outbound routes directly to businesses, contact centers and platforms. You sign up, get a free test DID, and see prices before you talk to anyone.

didXL is a wholesale supplier of virtual numbers and local termination, built mainly for telecom operators and communications platforms. Its website lists the services available in each country, with prices and terms on request.

The comparison is about how you buy numbers and voice, not about catalog size. Compare the exact countries, number types and destinations you need on both sides.

Two layers of a voice setup: call logic on top, carrier layer below. This page compares didlogic numbers and SIP trunks with didXL wholesale numbers and termination.

START WITH THE BUYER

Which one fits your business?

Both supply international numbers. The difference is who they are built for: a business or platform that wants to start today with published prices, or a telecom provider sourcing numbers wholesale.

Where didlogic is the stronger choice

You are a business, contact center, dialer or AI voice team and want numbers, SIP trunks and outbound routes from one account.
You want to start with one test DID and published prices, with no sales call first.
You want outbound international rates published per route and operator.
You want SIP trunks without a per-trunk or per-channel fee, created in the portal or over the API.
You want a carrier that operates its own network, with 12 physical PoPs and AS13006.
You want two-way SMS on the same number as voice, where the number supports it.

Where didXL is a good fit

You are a telco, CPaaS or UCaaS provider sourcing numbers in many markets through one wholesale interconnect.
In-country local termination with local caller ID is the central requirement.
You also need UIFN numbers from the same wholesale supplier.

START WITH THE NEED

Where to start, by what you need first

didlogic is a direct carrier for businesses and platforms. didXL is a wholesale supplier for providers. If you are not on either yet, start with the requirement that is hardest to change later.

A free test number, published prices, or numbers, SIP trunks, routes and SMS in one account point to didlogic. Local termination, UIFN or wholesale supply for your own customers point to didXL.

didlogic and didXL side by side: pick a starting point by what you need first, such as a free test number, published prices or SMS for didlogic, local termination or UIFN for didXL

didlogic vs didXL numbers and voice

How the two compare on numbers and voice. didXL details come from didXL’s public pages; check them against your own agreement. On mobile, swipe the table to compare every column.

Decision area	didlogic	didXL
What you buy	Phone numbers, SIP trunks, and inbound and outbound voice, bought directly by businesses and platforms.	Virtual numbers and local termination sold wholesale to telecom and communications providers.
Phone numbers	Local, mobile, national, and toll-free numbers by country, with rental and inbound prices published.	Fixed, mobile, national toll-free, and UIFN numbers by country. Stock and prices are not published.
Outbound voice	Outbound on the same account, with rates published per route and operator.	Local termination: calls are carried over the in-country number owner’s network, with in-country caller ID. Availability is per country.
SIP trunk pricing	No per-trunk or per-channel fee. Account levels set a minimum monthly commitment (from $20 on Core) and outbound channels (5, 50, or unlimited).	SIP and capacity terms are not described on the public site; confirm them with didXL.
Pricing	Public number and route pricing. You pay for what you use, above the minimum of your account level.	Prices are not published. Quote on request.
Getting started	Self-service sign-up, with a free test DID and trial credits for verified businesses.	Contact sales.
Messaging	Two-way SMS on SMS-enabled numbers, plus an SMS API with webhooks for inbound messages. Support varies by country and number type.	2-way SMS on numbers in supported countries.
Network	Own network: AS13006, 12 physical PoPs, direct Tier 1 connectivity.	Numbers are acquired through partners and delivered through one wholesale interconnect.

WHERE TO START

Good workloads to test first

International outbound

Compare per-route rates, call completion, and caller ID on one destination group.

Numbers for added markets

Check number availability for the countries you add, then route inbound calls to your PBX or platform.

AI agents and dialers

If Vapi, Retell, LiveKit, or your own stack runs the agent, point one market’s SIP trunk at didlogic and compare the same calls.

A first number, no sales call

Claim a free test DID, place real calls, and see what a number costs before you commit to a market.

The didlogic network, in numbers

didlogic runs its own network: AS13006 across 12 physical PoPs, with IP transit bought directly from Tier 1 carriers and SIP provisioning through the portal or API. Judge routing and call quality on your own traffic, with the free test DID and trial credits.

PoPs

physical points of presence on the didlogic network

didlogic-operated Autonomous System

per SIP trunk or channel fee

OUTBOUND VOICE

Check how outbound calls reach the destination

On didlogic

Outbound calls run over didlogic routes, with rates published per route and operator. You choose the caller ID from your own DIDs, set limits on every trunk (allowed IPs, channel cap, maximum call length and maximum call cost), and work with engineers on a route group when a destination needs attention.

On didXL

didXL describes a local termination service: calls are carried over the network of the in-country number owner, with in-country caller ID. Supported countries are listed in its coverage table.

Route-level routing and local termination are different models. Test both on the destinations you actually call.

COMPARE THE COST MODEL

What moves the bill on each side

Bring these to get a like-for-like quote

Countries, number types and quantities, and the monthly fee for each.
Inbound minutes and average call duration.
Outbound destinations and minutes.
Peak simultaneous calls.
Account level: didlogic sets a minimum monthly commitment, then bills usage at published rates.
Existing numbers that may need porting.

Create a Free Test Account

Cost model comparison: didlogic publishes outbound route rates, inbound rates, number rental and a $0 per trunk fee; didXL does not publish prices and quotes on request.

TEST BEFORE YOU DECIDE

Test on your own traffic before you commit

Whether you are choosing your first provider or adding one for new markets, start with one market, route group, or number. Expand only if the result justifies it.

Test didlogic

Step 1

Add a didlogic test connection

Claim a free test number once your business account is reviewed, add a test trunk, set authentication and caller ID, and agree the destinations to test.
Step 2

Route a representative sample

Use one market, one route group, one new number, or a controlled share of outbound traffic.
Step 3

Measure both on the same calls

Measure call completion, post-dial delay, caller-ID presentation, audio, DTMF or transfers, billing increments, and unit cost on comparable traffic.
Step 4

Expand only if it earns it

Add routes, markets, or numbers only after the technical and commercial result is clear. Porting stays a separate decision.

Test didlogic

CUSTOMER STORY

Outbound calls to Iraq, back at a 60%+ ASR

Zain’s network-level filtering had flagged the client’s caller IDs, and outbound calls to Iraqi leads stopped connecting. didlogic rebuilt the lane with dedicated termination routes, caller IDs validated against live completion data, and a standing rotation process that retires numbers before they degrade, bringing answer seizure ratio back to a sustained 60%+.

60%+ sustained ASR on Zain Iraq market recovered

Ongoing CLI rotation on the lane

Read the customer story

CUSTOMER REVIEWS

What teams running live traffic say

Published reviews from teams running traffic through didlogic, on Trustpilot and G2.

5.0

Quick support work

Had a cli issue on one dutch route. Sip side was fine, but the outbound number wasn't behaving as expected. Sent support a few call examples and they helped quickly. The next test calls came through as expected

Review collected by and hosted on Trustpilot

5.0

Smooth Onboarding, Excellent Support, and Reliable AI-Ready Performance

We've had a very positive experience. The onboarding process was smooth, and the support from our Account Manager has been excellent throughout. The web portal is intuitive and easy to use, making day-to-day management straightforward. Integration with our systems was simple and quick, allowing us to get up and running without any major challenges.

Review collected by and hosted on G2.com

5.0

Seamless Integration

Connected our 3CX system without any issues. Their interoperability with different PBX platforms is exactly what we needed for our hybrid setup

Review collected by and hosted on Trustpilot

didlogic vs didXL FAQ

Is didlogic a didXL alternative for international numbers?

Partly. Both supply international numbers. didXL sells wholesale to telecom and communications providers, while didlogic serves businesses and platforms directly with numbers, SIP trunks and outbound routes, with published pricing.

Does didXL offer outbound calling?

Yes. didXL describes a local termination service that carries calls over the in-country number owner’s network, with in-country caller ID. Check which countries are supported for your destinations.

How does pricing compare?

didlogic publishes number rental, inbound rates and outbound route rates, and account levels set a minimum monthly commitment. didXL does not publish prices on its website, so request a quote for the same markets and compare both on your own traffic mix.

Does didXL offer more services?

didXL lists UIFN and PSTN replacement alongside numbers and local termination. didlogic adds two-way SMS on SMS-enabled numbers and an SMS API, with availability that varies by country and number type. Check each service for your markets before the test.

How do SIP trunks and capacity compare?

On didlogic there is no per-trunk or per-channel fee. Outbound channels follow the account level (5, 50, or unlimited), and CPS is raised on request. didXL does not describe SIP or capacity terms on its public site, so confirm them with didXL and test both at your real peak.

Can I port numbers from didXL?

Eligible numbers can be ported, but portability, documents, fees and timing depend on the country and number type. Check before planning a cutover and keep the current service until the port is confirmed.